Blipbr uses an internal movement sensor to sense when any movement occurs.
If Blipbr senses movement, it takes a series of GPS locations and if it has moved sufficiently far enough (movement greater than 150-250 metres at a speed greater than 15km/h), it begins a trip, and sends a message to the App that a trip has begun.
The device icon (Map) and name (Devices list) will turn green to show that the device is in a trip.
During the trip, Blipbr will store a location waypoint every 2-5 minutes, and will upload the trip details every 30 minutes during the trip or at the end of the trip (5 minutes of no movement ), whichever comes first.
Blipbr Mini uploads Trip Start and End points only, and a waypoint every 15 minutes during a trip only in order to conserve battery power.
Blipbr will wait 5 minutes after the last movement to check that the trip has ended, and then end the trip (deducting the additional 5 minutes!)